Actual operating pressure and temperature should be confirmed according to the selected material, gasket, conveyed medium, pipe size and applicable project standard.
The ring crimping caps are available in the following stainless steel grades:
SS304 is commonly selected for general water-supply and building-service applications. SS316 and SS316L may be considered for applications requiring additional corrosion resistance.
The final material should be selected according to the operating medium, temperature, pressure, installation environment and applicable technical standard.
The socket end uses a ring crimping connection. During installation, the pipe is inserted into the socket and compressed with the appropriate ring crimping tool.
When used with a compatible gasket, pipe and installation tool, the connection provides a secure and leak-resistant termination without conventional threading or on-site welding.
Standard product marking can include:
LIANHE logo
Outside diameter
Wall thickness
Material grade
Customer logos and customized markings can be provided according to confirmed order requirements.
Available surface-treatment options include:
Vibration polishing
Magnetic polishing
Pickling
The appropriate finish can be selected according to the product specification, application and customer requirements.
Standard export packaging consists of:
Plastic bags
Cartons
Wooden cases
Customized labels, cartons and packing arrangements can be discussed according to the order quantity and shipping method.
The company’s listed management and certification documents include:
GB/T 19001-2016
ISO 9001:2015
CE
Sanitary License
The applicability of individual certificates may vary according to the product, material and intended market. Please contact Lianhe to confirm the documents available for your selected ring crimping cap.
Depending on the selected stainless steel grade, gasket material and operating conditions, the product may be used with:
Cold drinking water
Hot drinking water
Wastewater
Industrial water
Oil
Gas
Other compatible fluids
Compatibility should be confirmed before the product is used with chemicals, oil, gas, steam or other demanding media.
Stainless steel ring crimping caps can be used to terminate compatible piping systems in:
Engineering projects
Ships and marine installations
Commercial buildings
Residential buildings
Hospitals
Hotels
Environmental protection projects
Heating systems
Air-conditioning systems
Industrial facilities
The product may be incorporated into compatible:
Water piping systems
Gas piping systems
Direct drinking-water systems
Environmental protection piping systems
Heating piping systems
Air-conditioning piping systems
Industrial water piping systems
Other stainless steel ring crimping systems
For steam systems, confirm the gasket material, pressure rating and operating-temperature requirements with Lianhe before ordering.
The mechanically formed stainless steel construction provides strength and dimensional stability for compatible piping applications.
SS304, SS304L, SS316 and SS316L material options are available for different operating environments and corrosion-resistance requirements.
Stainless steel provides durability and wear resistance, helping reduce replacement and maintenance requirements when the product is correctly selected and installed.
As an end cap, the product terminates the pipeline without introducing unnecessary internal components into the piping route.
The mechanical ring crimping connection can provide reliable joint performance in appropriately designed piping installations subject to vibration or movement.
Stainless steel is durable and recyclable, making it suitable for long-life piping installations.
The ring crimping connection reduces the need for conventional threading or on-site welding, helping simplify installation.
The compact connection is suitable for both exposed and concealed piping systems, subject to applicable construction and inspection requirements.
Fast installation, durable stainless steel construction and limited routine maintenance can help reduce the overall cost of the piping system.
The stainless steel body provides resistance to wear under suitable operating conditions.
The product can be used in compatible drinking-water systems when the selected material, gasket and complete piping system meet the relevant sanitary requirements.
When installed with the correct gasket, pipe and crimping tool, the cap provides a secure and leak-resistant pipe-end connection.
Testing may include:
Hydrostatic testing
Airtightness testing
Pressure testing
Negative-pressure testing
Drawing tests
Hot- and cold-water cycle testing
Hydrostatic bending and torsion testing
Hydrostatic vibration testing
Hydrostatic impact testing
The specific test program should be confirmed according to the product specification, applicable standard and order requirements.
Delivery inspection may cover:
Material grade
Surface condition
Product dimensions
Hydrostatic performance
Airtightness
Subject to the product and order requirements, the following documents may be available:
EN 10204 3.1 material test certificate
Raw-material inspection certificate
Radiographic test report
Hydraulic sealing test report
Dimensional inspection report
Third-party inspection report
Please confirm the required reports before ordering. Some reports may apply only to specific products, production batches or inspection arrangements.
Lianhe applies in-process and final inspection procedures throughout production. Products are inspected before shipment according to the applicable specification and order requirements.
The stainless steel grade, outside diameter and wall thickness are checked before production.
After cutting, the material length and pipe-end condition are inspected.
After mechanical processing, the socket dimensions, outside diameter and wall thickness are checked.
Where applicable, the formed area, weld dimensions and surface condition are inspected.
After heat treatment, the product surface, dimensions and socket geometry are checked.
After polishing or pickling, the finished surface is inspected against the applicable quality requirements.
Products undergo the applicable hydraulic and airtightness inspection according to the product specification and inspection plan.
Product markings, quantities and packaging are checked before shipment.
Production and inspection equipment for stainless steel press and ring crimping products includes:
5 automatic pipe-welding production lines
2 laser-cutting machines
5 vibration-polishing machines
2 magnetic-polishing machines
5 airtightness and hydraulic-testing units
3 forming machines
3 grooving machines
2 drilling machines
10 CNC lathes
6 end-facing machines
2 vertical water-expansion machines
2 frame-type water-expansion machines
10 pipe-bending machines
8 automatic argon-arc welding machines
4 hydraulic drawing machines
4 high-speed hydraulic punching machines
2 laser-marking machines
Packaging and related production equipment
The standard payment arrangement is:
30% T/T deposit
70% T/T balance before delivery
Specific payment terms can be discussed according to the order. Available payment methods may include:
T/T
Western Union
PayPal
Available trade terms include:
EXW
FOB
CFR
CIF
DDP
DDU
Orders can be shipped:
By sea
By air
By international express
The general minimum order quantity is 5–10 pieces.
Stock availability depends on the requested product, size, material and current inventory. Please contact Lianhe to confirm available quantities and the earliest delivery date.
Free samples may be available for quality evaluation. Courier or express delivery charges are not included and are normally borne by the customer.
Sample availability should be confirmed according to the requested size, material and specification.
Actual quotation and delivery times depend on the product specification, quantity, stock availability, production schedule and shipping requirements.
The standard quality warranty period is one year.
If a confirmed product-quality issue occurs within the applicable warranty conditions, Lianhe will work with the customer to determine an appropriate solution.
Our sales team works with customers from different markets and can assist with market-specific product, marking, packaging and documentation requirements.
Lianhe operates its own manufacturing facility in Wenzhou, China, supporting the production and supply of stainless steel fittings and related products.
Our technical team can assist with material selection, product specifications, connection requirements and customized production.
Production planning and cost management help us provide commercially competitive quotations based on the required material, quantity and specification.
Our team has experience in the production, inspection, sales and order management of stainless steel press and ring crimping fittings.
For an accurate quotation, please provide:
Product name
Required size
Wall thickness
Stainless steel grade
Applicable standard
Required quantity
Conveyed medium
Working pressure
Operating temperature
Gasket requirement
Product-marking or OEM requirements
Packaging requirements
Required inspection documents
Destination country
Preferred trade terms
Contact Lianhe for technical confirmation, current stock, sample availability and pricing.
Address
Building 2, No.3991, Binhai 3 Road, Wenzhou Economic Technological Development
Tel
