Products

Size Range: DN6~DN100 （1/8"~4"）
Standards: GB/T26120,MSS SP43, ISO 4144,
The connection end is threaded (BSPT, BSPP, NPT, DIN259/2999 ,ISO228 etc).Female(Inside Thread).
Process: All machined by CNC Machining.
Cast: Investment Casting Foundry-Wax Lost Technology
Material: Material: SS304(CF8, SUS304, 1.4308), SS316(CF8M, SUS316, 1.4408), SS304L, SS316L
Packing: Woven bag + carton;

Size Range: 1/8"~4" (DN6~DN100)
Pressure：150#
Standards: MSS SP43, ISO 4144, GB/T26120
The connection end is BSPT, BSPP, NPT, threaded DIN259/2999,ISO228 etc. Female(Inside Thread);
Process: Investment Casting Body, CNC lathes process
Casting: Investment Casting Foundry-Wax Lost Technology
Material: SS201,1.4372 SS304 1.4301, SS316 1.4401 SS316L 1.4404 …

Size Range: 1/2”×1/4”~2"×1-1/2” (DN15×DN10~DN50×DN40)
Thickness：0.6~2MM
Standards: GB/T19228.2-2011 CJ/T 152-2016 CJ/T466-2014 EN DIN ASME
Type: A type,Female Thread-Press type, Male Thread-Press type;
Material: SS304 S30408,SS316 S31603,SS304L S30403 ,SS316L S31603.
Ring Gasket Material: CIIR, EPDM,PTFE, Nitrile.
Connection Mode of Socket End: D Type and S Type;
Nominal pressure: PN16; Water pressure test:2.5MPa; Air tightness test pressure: 1.05MPa.

Size Range: 1/4”~4" (DN10~DN100)
Thickness：0.6~2MM
Standards: GB/T19228.2-2011 CJ/T 152-2016 CJ/T466-2014 EN DIN ASME
Material: SS304,SS316,SS304L ,SS316L.
Ring Gasket Material: CIIR, EPDM,PTFE, Nitrile.
Connection Mode of Socket End: D Type and S Type;
Nominal pressure: PN16; Water pressure test:2.5MPa; Air tightness test pressure: 1.05MPa.

Size: 3/8”~60" (DN10~DN1500);
Pressure: Class 150lbs ~2500lbs;PN6, PN10, PN16, PN25, PN40;5K, 10K, 20K;
Flange Type: Plate Flange, Slip On Flange, Weld Neck Flange, Blind Flange, Lap Joint Flanges.
Flange Face: RF, FF, RTJ, Male Face, Female Face, Tongue Face T, Groove Face G,
Manufacturing Standard: ANSI B16.5, ASME B16.47, JIS B2220, EN1092-1, BS4504, GB/T9119, DIN2502/2503/25727/2565/2566/2573/2576/2632~2638/86029/86030, AS2129, GOST 12821;
Material: SS304, SS304L, SS316, SS316L, SS321, SS310S, SS347, 0Cr18Ni9, 0Cr17Ni12Mo2, 1.4301, 1.4404, 1.4306, 1.4404;S31803, S32205, S32750, S32760, 904L;
Technology: Forging, CNC lathe processing;
Mark: Logo, Size, Pressure, Standard, Material, Heat No.(Can mark the customer's LOGO and mark according to customer's requirement.);